Windows 95, OSR2

   Introduction:
   -------------
   This document describes the procedure to install  Windows 95 and OSR2
   driver for Realtek RTL8139 PCI Fast Ethernet adapter.

   Location of Driver:     \WIN95\RTL8139.SYS

   Installing driver procedure on Microsoft Windows 95 :
   -----------------------------------------------------
      Before you start with the installation process, make sure that your
      adapter should be properly installed in your PCI bus slot.
      Executing Windows 95, it will auto-detect your system configuration
      and find the adapter hardware.  ( If Win95 does not  prompt that it
      detects the PCI Ethernet adapter,there must be something wrong with
      the RTL8139 PCI Fast Ethernet adapter or your system enviroment.)

    1. Windows 95 will prompt with "PCI Ethernet Controller" in the "New
       Hardware Found" dialog box.

    2. Select "Driver from disk provided by hardware manufacturer" from
       the "New Hardware Found" dialog box, then click the OK button.

    3. Insert the Driver Diskette in your floppy drive.       

    4. Enter the driver pathname "A:\WIN95", then click the OK
       button in the "Install from Disk" dialog box.

    5. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
       and click the OK button in the "Insert Disk" dialog box.

    6. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
       installation files in the "Copying Files..."  dialog box,
       then click the OK button.

    7. Windows 95 will copy the driver (.SYS) from A:\WIN95 to
       C:\WINDOWS\SYSTEM directory and the driver (.INF) from
       A:\WIN95 to C:\WINDOWS\INF directory.

    8. Restart your computer to initialize the network function.